Taperbøsning
Global industri standard for fiksering af remskiver, kædehjul og koblinger på drivaksler.
Taperbøsning er en pålidelig og tidsbesparende løsning for montering og afmontering på aksler med not.
Konisk bøsning i støbejern (GG25) med fosfateret overflade, færdig udboret med notgang. Anvendelig til mange typer remskiver, kædehjul og koblinger.
Ingen bearbejdning
Det komplette program af taperbøsninger med standard udboring, giver stor fleksibilitet til dine remskiver, kædehjul eller koblinger, uden behov for ekstra bearbejdning.
Hurtig montering
Nem og hurtig montering og afmontering af remskiver, kædehjul og koblinger.
Standard notgang
Notgangen for metrisk udboring følger DIN 6885 / SS2305 og imperisk udboring følger BS 46:Pt 1.
Bredt sortiment
Bøsninger tilgængelige fra størrelse 1008 til 5050
Tilgængelige udboringer fra 10 mm til 125 mm
Standarder
DIN 6885/SS2305 (metrisk udboring)
BS 46:Pt 1 (imperisk udboring)
Overfladebehandling
Fosfatering for øget korrosionsbeskyttelse.
Teknisk information
| Bush No. | L (mm) | A (mm) | D (mm) | Screw dia x length (inch | BSW) | Hex key dim. | Tightening torque (Nm) |
|---|---|---|---|---|---|---|
| 1008 | 22.3 | 35.1 | 33.7 | 1/4 x 1/2 | 3 | 5.6 |
| 1108 | 22.3 | 38.2 | 36.9 | 1/4 x 1/2 | 3 | 5.6 |
| 1210 | 25.4 | 47.5 | 44.5 | 3/8 x 5/8 | 5 | 20 |
| 1215 | 38.1 | 47.5 | 44.5 | 3/8 x 5/8 | 5 | 20 |
| 1310 | 25.4 | 50.7 | 47.6 | 3/8 x 5/8 | 5 | 20 |
| 1610 | 25.4 | 57.1 | 53.9 | 3/8 x 5/8 | 5 | 20 |
| 1615 | 38.1 | 57.1 | 53.9 | 3/8 x 5/8 | 5 | 20 |
| 2012 | 31.8 | 69.8 | 66.7 | 7/16 x 7/8 | 6 | 31 |
| 2517 | 44.5 | 85.7 | 82.6 | 1/2 x 1 | 6 | 48 |
| 3020 | 50.8 | 107.9 | 101.6 | 5/8 x 1 1/4 | 8 | 90 |
| 3030 | 76.2 | 107.9 | 101.6 | 5/8 x 1 1/4 | 8 | 90 |
| 3525 | 63.5 | 126.8 | 122.6 | 1/2 x 1 1/2 | 10 | 113 |
| 3535 | 88.9 | 126.8 | 122.6 | 1/2 x 1 1/2 | 10 | 113 |
| 4030 | 76.2 | 145.8 | 140.7 | 5/8 x 1 3/4 | 12 | 170 |
| 4040 | 101.6 | 145.8 | 140.7 | 5/8 x 1 3/4 | 12 | 170 |
| 4535 | 88.9 | 161.7 | 155.7 | 3/4 x 2 | 14 | 192 |
| 4545 | 114.3 | 161.7 | 155.7 | 3/4 x 2 | 14 | 192 |
| 5040 | 101.6 | 177.6 | 170.7 | 7/8 x 2 1/4 | 14 | 271 |
| 5050 | 127.0 | 177.6 | 170.7 | 7/8 x 2 1/4 | 14 | 271 |
Bore in mm:
Standard keyway, the keyway follows standard DIN 6885 part 1.
Shallow keyway, the keyway follows standard DIN 6885 part 3.
Bore in inch:
Keyway according to BS46: Part 1
| Bush No. | Bore size in mm and inch | Keyway |
|---|---|---|
| 1008 | mm 10 - 22 | Standard |
| 1008 | mm 24 - 25 | Shallow |
| 1008 | in. 1/2 - 7/8 | Standard |
| 1008 | in. 1 5/6 - 1 | Shallow |
| 1108 | mm 10 - 25 | Standard |
| 1108 | mm 28 | Shallow |
| 1108 | in. 1/2 - 1 | Standard |
| 1108 | in. 1 1/16 - 1 1/8 | Shallow |
| 1210 | mm 10 - 32 | Standard |
| 1210 | in. 1/2 - 1 1/4 | Standard |
| 1215 | mm 11 - 32 | Standard |
| 1215 | in. 1/2 - 1 1/4 | Standard |
| 1310 | mm 14 - 35 | Standard |
| 1310 | in. 1/2 - 1 3/8 | Standard |
| 1610 | mm 10 - 42 | Standard |
| 1610 | in. 1/2 - 1 1/2 | Standard |
| 1610 | in. 1 9/16 - 1 5/8 | Shallow |
| 1615 | mm 14 - 40 | Standard |
| 1615 | mm 42 | Shallow |
| 1615 | in. 1/2 - 1 1/2 | Standard |
| 1615 | in. 1 9/16 - 1 5/8 | Shallow |
| 2012 | mm 10 - 50 | Standard |
| 2012 | in. 1/2 - 2 | Standard |
| 2517 | mm 16 - 65 | Standard |
| 2517 | in. 1/2 - 2 1/2 | Standard |
| 3020 | mm 24 - 75 | Standard |
| 3020 | in. 1 3/16 - 3 | Standard |
| 3030 | mm 24 - 75 | Standard |
| 3030 | in. 1 3/16 - 3 | Standard |
| 3525 | mm 30 - 95 | Standard |
| 3525 | mm 100 | Shallow |
| 3525 | in. 1 3/16 - 3 1/4 | Standard |
| 3525 | in. 3 5/16 - 3 1/2 | Shallow |
| 3535 | mm 30 - 90 | Standard |
| 3535 | in. 1 3/16 - 3 1/4 | Standard |
| 3535 | in. 3 5/16 - 3 1/2 | Shallow |
| 4030 | mm 40 - 110 | Standard |
| 4030 | mm 115 | Shallow |
| 4030 | in. 1 7/16 - 3 3/4 | Standard |
| 4030 | in. 3 7/8 - 4 | Shallow |
| 4040 | mm 40 - 110 | Standard |
| 4040 | in. 1 7/16 - 3 3/4 | Standard |
| 4040 | in. 3 7/8 - 4 | Shallow |
| 4535 | mm 42 - 125 | Standard |
| 4535 | in. 1 15/16 - 4 1/4 | Standard |
| 4535 | in. 4 3/8 - 4 1/2 | Shallow |
| 4545 | mm 42 - 115 | Standard |
| 4545 | in. 1 15/16 - 4 1/4 | Standard |
| 4545 | in. 4 3/8 - 4 1/2 | Shallow |
| 5040 | mm 48 - 125 | Standard |
| 5040 | in. 2 7/16 - 5 | Standard |
| 5050 | mm 48 - 125 | Standard |
| 5050 | in. 2 7/16 - 5 | Standard |
| Bush size | Bore Diameter (mm) | Values for transmittable torque without key (Nm) | Values for tightening (Nm) |
|---|---|---|---|
| 1008 | 12 | 29 | 5.6 |
| 1008 | 19 | 51 | 5.6 |
| 1008 | 24 | 66 | 5.6 |
| 1108 | 12 | 28 | 5.6 |
| 1108 | 19 | 49 | 5.6 |
| 1108 | 24 | 64 | 5.6 |
| 1108 | 28 | 79 | 5.6 |
| 1210/15 | 16 | 82 | 20 |
| 1210/15 | 19 | 105 | 20 |
| 1210/15 | 24 | 142 | 20 |
| 1210/15 | 32 | 210 | 20 |
| 1610/15 | 19 | 98 | 20 |
| 1610/15 | 24 | 135 | 20 |
| 1610/15 | 38 | 240 | 20 |
| 1610/15 | 42 | 265 | 20 |
| 2012 | 24 | 165 | 31 |
| 2012 | 38 | 310 | 31 |
| 2012 | 42 | 340 | 31 |
| 2012 | 48 | 400 | 31 |
| 2012 | 50 | 420 | 31 |
| 2517/25 | 24 | 220 | 48 |
| 2517/25 | 38 | 320 | 48 |
| 2517/25 | 42 | 430 | 48 |
| 2517/25 | 48 | 510 | 48 |
| 2517/25 | 55 | 600 | 48 |
| 2517/25 | 60 | 670 | 48 |
*Bore diameter is only available in short bush type
| Bush size | Bore Diameter (mm) | Values for transmittable torque without key (Nm) | Values for tightening (Nm) |
|---|---|---|---|
| 3020/30 | 38 | 520 | 90 |
| 3020/30 | 48 | 730 | 90 |
| 3020/30 | 55 | 890 | 90 |
| 3020/30 | 60 | 970 | 90 |
| 3020/30 | 75 | 1300 | 90 |
| 3525/35 | 42 | 1000 | 113 |
| 3525/35 | 60 | 1580 | 113 |
| 3525/35 | 75 | 2150 | 113 |
| 3525/35 | 90 | 2600 | 113 |
| 3525/35 | 100* | 3075 | 113 |
| 4030/40 | 48 | 1700 | 170 |
| 4030/40 | 60 | 2300 | 170 |
| 4030/40 | 75 | 3900 | 170 |
| 4030/40 | 100 | 4400 | 170 |
| 4030/40 | 115* | 5150 | 170 |
| 4535/45 | 55 | 2500 | 192 |
| 4535/45 | 75 | 3900 | 192 |
| 4535/45 | 100 | 5500 | 192 |
| 4535/45 | 110 | 6300 | 192 |
| 4535/45 | 125* | 6625 | 192 |
| 5040/50 | 75 | 3950 | 271 |
| 5040/50 | 100 | 5650 | 271 |
| 5040/50 | 125 | 7370 | 271 |
| 5040/50 | 130* | 7725 | 271 |
